Hitachi VSP F1500 User And Reference Manual page 373

Executing/
Error message
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
raidcom add journal
Error code
Async
SSB1 SSB2
2E30 005F
2E30 0062
2E30 0064
2E30 0065
2E30 0067
2E30 0068
2E30 0070
2E30 0074
2E30 0084
2E30 0086
2E30 0208
2EE4 08E6
2EE4 50EE
2EE4 FEEC
Troubleshooting
Command Control Interface User and Reference Guide
Description
volume differs from the CLPR ID of the registered
journal volume.
The specified LDEV is a remote command device.
The specified volume cannot be used as a journal
volume because it is an external volume that can
execute the I/O suppression mode.
The specified volume is a reserved volume of a
mainframe host.
The specified volume is used by XRC.
The specified volume is a volume of Just in Time
(On-demand) function.
The specified volume cannot be used as a journal
volume because it is used by Compatible PAV.
The resource group ID of the specified volume
cannot be registered because the resource group
ID is different from the resource group ID of the
other journal volume in the specified journal group.
The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
The specified LDEV cannot be used as a journal
volume because the size of the LDEV is less than
the minimum capacity of journal volume.
The operation cannot be performed because the
specified volume is not the Dynamic Provisioning
V-VOL.
The operation cannot be performed because the
specified LDEV is a volume for which capacity
saving setting is enabled or a deduplication system
data volume.
The command cannot be accepted. After a while,
execute the same command.
An internal error occurred.
Call Hitachi Data Systems customer support.
An internal error occurred.
Call Hitachi Data Systems customer support.
9-49