Systems - Hitachi VSP F1500 User And Reference Manual

Command control interface guide

Hide thumbs Also See for VSP F1500:

Table of Contents

# export HORCC_MRCF=1

# cat /etc/horcmperm.conf | grep vg01 | raidscan -find verify 1 -fd

# vgdisplay -v /dev/vg01|grep dsk|sed 's/\/*\/dsk\//\/rdsk\//

g'|raidscan -find verify 1 -fd

/dev/rdsk/c0t3d0

/dev/rdsk/c0t3d1

/dev/rdsk/c0t3d2

/dev/rdsk/c0t3d3

Naming of $HORCMPERM file on Windows systems

$HORCMPERM is %windir%\horcmperm.conf or %windir%\horcmperm*.conf

(* = instance number) by default.

type $HORCMPERM | x:\HORCM\etc\raidscan.exe -find inst

# The following are an example to permit the DB Volumes.

# Note: a numerical value is interpreted as Harddisk#.

# DB0 For MU# 0

# DB1 For MU# 1

Verifying a group for DB1. The following is an example of how to verify

whether a DB volume group is mapped to a group (MU#1 for ShadowImage)

in the horcm.conf file correctly.

D:\HORCM\etc> set HORCC_MRCF=1

D:\HORCM\etc> echo hd20-23 | raidscan -find verify 1 -fd

Without a $HORCMPERM file: Commands to run on different operating systems

If NO $HORCMPERM file exists, run a command on the host to permit all

volumes on the host.

run on different operating systems on page 7-14

on each operating system.

Table 7-3 Without a $HORCMPERM file: Commands to

Data protection operations with CCI

Command Control Interface User and Reference Guide

shows the command to run

Show Quick Links

Table of Contents

Troubleshooting