Hitachi VSP F1500 User And Reference Manual page 214

Ste
p
7
The following table shows the procedure when the host group is registered in
the SPM group.
Note: For cautions when registering host groups to the SPM group and
operating them (VSP only), see
registering them in SPM groups (VSP only) on page
Table 5-5 Controlling server performance when the host group is
Ste
p
1
2
3
5-60
Operation
Description
overview
limit value prioritized WWN by
of the non- specifying WWN or
prioritized the SPM name.
WWN
Change the threshold
or the upper limit
value of the non-
prioritized WWN by
specifying the SPM
group name.
Deleting Delete WWN from the
WWN from SPM targets by
the SPM specifying WWN or
targets the SPM name.
Delete WWN from the
SPM targets by
specifying the SPM
group name.
registered in the SPM group (VSP only)
Operation
Description
overview
Registering Specify the host
the host group to which WWN
group that of the host bus
contains adapter is registered
WWN and register the host
controlled group to the SPM.
by SPM to
the SPM
group
Changing Specify the host
the group to change the
threshold or threshold or the
the maximum value of
maximum the nonpreferred
value of WWN.
nonpreferre
d WWN.
Checking Specify the WWN
the SPM name to display the
information SPM setting status.
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Executed command
raidcom modify spm_group -port <port#>
[-spm_priority <y/n>] {-limit_io |
-limit_kb | -limit_mb } <value> -
spm_group <group_name>
raidcom delete spm_wwn -port <port#>
[-hba_wwn <wwn_strings> | -spm_name
<nick_name> ]
raidcom delete spm_group -port <port#>
-spm_group <group_name>
Cautions when using host groups after
Executed command
raidcom add spm_group -spm_group <group
name>
-port <port#> [<host group name>]
-spm_host_grp
raidcom modify spm_group -port <port#>
[<host group name>] -spm_host_grp
[ -spm_priority <y/n> ] { -limit_io
|
-limit_kb |
raidcom get spm_wwn -port <port#>
[ -hba_wwn <wwn_strings> ]
5-65.
-limit_mb } <value>