Hitachi VSP F1500 User And Reference Manual page 391

Executing/
Error message
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
Get Command
Status
Table 9-39 SSB codes returned by raidcom delete lun
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
raidcom modify ldev -quorum_disable
Error code
Async
SSB1 SSB2
2E10 A007
2E11 0053
2E20 0000
2E21 810A
2EE8 FEEC
raidcom delete lun
Error code
Async
SSB1 SSB2
B958 0107
B958 0155
B958 015D
B958 0202
B958 0203
B958 020A
B958 020B
B958 020F
Troubleshooting
Command Control Interface User and Reference Guide
Description
The setting of the quorum disk was released but
the operation failed.
If you display the ldev information using raidcom
get ldev command, "QRD" (that means the disk is
the quorum disk) is not displayed on VOL_ATTR
because the quorum disk setting was released. But
the management information possibly remains in
the external volume.
If you define again an external volume in which the
management information remains as a quorum
disk, an error may occur. When you reuse an
external volume which was used as a quorum disk
after removing it, format the external volume.
The specified LDEV is being used for other
operation.
LDEV is not installed.
A shared memory is not installed.
Internal error occurred.
Description
An internal error occurred.
The other than multiplatform volume or OPEN
volume is included in the specified LDEV.
An used LDEV exists in the specified LDEV.
It cannot be deleted because it is the last path of a
TrueCopy or GAD pair.
It cannot be deleted because it is the last path of
ShadowImage.
It cannot be deleted because it is the last path of
Thin Image or Copy-on-Write Snapshot.
It cannot be deleted because it is the last path of
Universal Replicator.
The specified LDEV is not installed.
9-67