Hitachi VSP F1500 User And Reference Manual page 101

Login Command
user device
User 10 CM0
CM10
CM11
CM20
User 20 CM0
CM10
CM11
CM20
* To use each resource group, the user must separately execute raidcom -login command. For details
about the raidcom -login command, see Command Control Interface Command Reference.
As shown in the table above, the relation among users, command devices
and operations of resource groups are the following.
• The range that can be operated by command device 0 (CM0) or Out-of-
Band is the shared range (AND) of resource groups that are allocated to
each user and all resource groups.
• The range that can be operated by command device 10 (CM10) is the
shared range (AND) of resource groups that are allocated to each user
and resource group 10 that the command devices are allocated.
Therefore, in the range of resource group 10 can be operated.
Operating range
and the shared ports after
logging in.
Can operate only in the
range of resource group 10
and 11, and the shared ports
after logging in.
Can operate only in the
range of resource group 10,
and the shared ports after
logging in.*
Can operate only in the
range of resource group 11,
and the shared ports after
logging in.*
Cannot log in. Nothing is displayed or the
operation authority error.
Can operate only in the
range of resource group 20,
and the shared ports after
logging in.
Cannot log in. Nothing is displayed or the
operation authority error.
Cannot log in. Nothing is displayed or the
operation authority error.
Can operate only in the
range of resource group 20,
and the shared ports after
logging in.
CCI functions
Command Control Interface User and Reference Guide
Configuration
Reference
change
Operable Operable
Operable Operable
Operable Operable
Operation authority
error
Operable Operable
Operation authority
error
Operation authority
error
Operable Operable
Command
operations
using the
out-of-
band
method
Operable
Inoperable
Inoperable
Inoperable
Operable
Inoperable
Inoperable
Inoperable
3-23