Hitachi VSP F1500 User And Reference Manual page 69

The following figure shows a graphical representation of the CCI log and trace
files within the CCI configuration environment.
The startup log, error log, trace, and core files are stored as shown in
2-4 Log file names and locations on page
the HORCM and command log files using the HORCM_LOG and HORCC_LOG
environment variables as shown in
directories on page
error occurs before the log files are created, the error logs are output in the
system log file. If the HORCM activation fails, the system administrator
should check the system log file and activation log, identify the error cause,
and take the proper action. The system log file for UNIX-based systems is the
syslog file. The system log file for Windows-based systems is the event log
file.
File UNIX-based systems
Startup HORCM startup log:
log
$HORCM_LOG/horcm_HOST.log
Command log: $HORCC_LOG/
horcc_HOST.log
$HORCC_LOG/horcc_HOST.oldlog
Figure 2-24 Logs and traces
2-42. If it is not possible to create the log files, or if an
Table 2-4 Log file names and locations
CCI software environment
Command Control Interface User and Reference Guide
2-41. Specify the directories for
Table 2-5 Environment variables for log
Windows-based systems
HORCM startup log:
$HORCM_LOG\horcm_HOST_log.txt
Command log: $HORCC_LOG\horcc_HOST_log.txt
$HORCC_LOG\horcc_HOST_oldlog.txt
Table
2-41