Hitachi VSP F1500 User And Reference Manual page 356

Executing/
Error message
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
Table 9-14 SSB codes returned by raidcom disconnect external_grp
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
9-32
raidcom check_ext_storage path
Error code
Async
SSB1 SSB2
2E30 001E
2E30 8400
2E30 840E
2EDA 00EE
2EDA 0905
B980 B901
B980 B902
raidcom disconnect external_grp
Error code
Async
SSB1 SSB2
2E00 4100
2E10 0000
2E10 0001
2E10 0003
2E10 0004
2E10 0008
2E10 0012
2E10 0062
2E10 0063
Troubleshooting
Command Control Interface User and Reference Guide
Description
Online from the mainframe host.
The port attribute is not External (ELUN).
The command cannot be executed with the
specified port attribute.
The command cannot be accepted. After a while,
execute the same command.
An internal error occurred by the operation of
external path.
Call Hitachi Data Systems customer support.
The command was rejected because the specified
port is for NAS platform (System LU).
The command was rejected because the specified
port is for NAS platform (User LU).
Description
The external volume group is not in the effective
range.
The specified LDEV is used for a ShadowImage
pair.
It is used as a TrueCopy or Universal Replicator
pair.
A ShadowImage pair, a Thin Image/Copy-on-Write
Snapshot pair or a Compatible FlashCopy® V2
relationship or in status of splitting or pending
exists.
The specified LDEV is used for a Thin Image pair
or a Copy-on-Write Snapshot pair.
It is used as a system disk.
It is used as a concurrent copy or XRC.
The specified LDEV is used as the primary volume
of a global-active device (GAD) pair.
The specified LDEV is used as the secondary
volume of a GAD pair.