Hitachi VSP F1500 User And Reference Manual page 515

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing /
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing /
Get Command Async
Status
Table 9-156 SSB codes returned by raidcom add parity_grp
Executing/
Error message
CMDRJE Executing/
Get Command Async
Status
CMDRJE Executing/
Get Command Async
Status
CMDRJE Executing/
Get Command Async
Status
CMDRJE Executing/
Get Command Async
Status
CMDRJE Executing
raidcom initialize pool
Error code
Async
SSB1 SSB2
2E10 6024
2E11 0204
2E11 9400
2E20 6000
2E21 8101
2E30 000F
2EE7 00F0
2EE7 FEEC
raidcom add parity_grp
Error code
Async
SSB1 SSB2
2E00 000D
2E00 0101
2E00 0108
2E00 7000
2E00 8500
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified pool is being deleted.
The deduplication system data volume defined in
the specified pool or the volume for which the
deduplication function is enabled is not blocked.
The command cannot be accepted. Wait a while
and issue the same command.
The specified pool is not installed.
The control memory or shared memory for
Dynamic Provisioning is not installed.
The volume defined in specified pool is used as a
journal volume.
The specified command cannot be accepted
because the command is not supported.
The internal error occurs. Contact Hitachi Data
Systems customer support.
Description
The emulation type is incorrect.
The parity group number is not in the effective
range.
The RAID type of the specified parity group is not
correct.
The specified CLPR ID is out of the range.
The specified drive box or drive is not correct.
9-191