Command Error Messages - Hitachi VSP F1500 User And Reference Manual

Message ID
CfEC=n, MNEC=n,
SCEC=n, BNEC=n

Command error messages

The following table lists and describes the command error messages and their
return values and provides recommended action for resolving the error
conditions.
The messages below are typical command error messages. Check the
command log file for details of the error. For details about the command log
file, see
Error Error
code message
EX_COME Can't be
RR communi
cate with
HORC
Manager
EX_REQA Required
RG Arg list
EX_INVA Invalid
RG argument
EX_UNW Unknown
OPT option
EX_ATTH Can't be
OR attached
to HORC
Manager
9-8
Condition
CCI log files on page
Table 9-2 Command error messages
Condition
This command failed to
communicate with the CCI
software.
An option or arguments of
an option are not sufficient.
An option or arguments of
an option are incorrect.
Designated an unknown
option.
Could not connect with
HORCM.
Troubleshooting
Command Control Interface User and Reference Guide
Cause
<op> command for verifying the
validation parameters.
(1)Check if the block size (-vs
<size>) is an appropriate size.
(2)Check if the type for checking
(-vt <type>) is an appropriate
type.
(3)Check if the data validations
are disabled for LVM
configuration changes.
(4)Check if the data validations
are not shared on file system.
(5)Check if the redo log and data
file are separated among the
volumes.
2-40.
Recommended action
Confirm whether HORCM is enabled. If
HORCM is not activated yet, start
HORCM. If HORCM ended abnormally
despite being activated, verify the disk
capacity has 3000 KB or more free
space. Free up disk space, and then
restart HORCM. If the problem persists,
contact Hitachi Data Systems customer
support.
Please designate the correct option
using the -h option.
Please designate the correct option
using the -h option.
Please designate the correct option
using the -h option.
Please verify that HORCM is running
and/or that HORCMINST is set correctly.
Recommended action
Returne
d Value
255
254
253
252
251