Raidcom Delete Ldev Command To Delete A Virtual Volume - Hitachi VSP F1500 User And Reference Manual

Figure 5-10 Script examples of virtual volume operation (Dynamic
Deleting a virtual volume for which capacity saving is enabled
You can use either of the following methods to delete virtual volume for which
the capacity saving setting is enabled:
• Execute the raidcom delete ldev command with the -operation
initialize_capacity_saving option. This command option is supported
by CCI version 01-40-03/xx and later.
• Execute the commands for blocking the LDEV, initializing the LDEV, and
then deleting the LDEV. You can use this method regardless of the CCI
version.
Using the -operation initialize_capacity_saving option of the raidcom
delete ldev command to delete a virtual volume
Use the following procedure to delete a virtual volume by executing the
raidcom delete ldev command with the -operation
initialize_capacity_saving option. The command examples in this
procedure use LDEV number 200 for the virtual volume being deleted.
1 Delete the volume by executing the raidcom delete ldev command with
.
the -operation initialize_capacity_saving option.
# raidcom delete ldev -operation initialize_capacity_saving -
ldev_id 200
2 Verify that the delete LDEV command completed normally by executing
.
the raidcom get command_status command. If the command completed
normally, the value "0" is returned.
# raidcom get command_status
3 Check the status of the volume by executing the raidcom get ldev
.
command.
Provisioning) (3/3)
Provisioning operations with CCI
Command Control Interface User and Reference Guide
5-31