Pairdisplay -F[D] - Hitachi VSP F1500 User And Reference Manual

pairdisplay -f[d]

This option shows the relation between the Device_File and the paired
volumes (protected volumes and permitted volumes), based on the group,
even though this option does not have any relation with protection mode.
# pairdisplay -g oradb -fd
Group
LDEV# M
oradb
35013
oradb
35013
If either the local or the remote host (instance) has not been shown the
Device_File, then pair operations are rejected (except the local option such as
"-l") in protection mode because of Unknown volume, as shown in the
following example.
# pairdisplay -g oradb -fd
Group
LDEV# M
oradb
35013
oradb
Permitting protected volumes
Protection mode needs recognition step to check accessible volumes and the
horcm.conf at the startup of HORCM on protection mode. The protected
volumes must be registered to enable the Data Protection Facility at each
startup of HORCM, so that this registration process is executed automatically
by /etc/horcmgr.
With a $HORCMPERM file
The following is executed for registration of permitted volume file
($HORCMPERM file), if $HORCMPERM file exists and there are permitted
volumes. To permit only the volumes specified, then the volume list must be
defined in the $HORCMPERM file.
Naming of $HORCMPERM file on UNIX systems
$HORCMPERM is /etc/horcmperm.conf or /etc/horcmperm*.conf (* =
instance number) by default. For example, on HP-UX systems:
cat $HORCMPERM | /HORCM/usr/bin/raidscan -find inst
# The following are an example to permit the LVM Volume groups.
# For MU# 0
vg00
vg00
# For MU# 1
vg01
vg01
Verifying a group for vg01. The following are examples how to verify whether
a LVM volume group is mapped to group (MU#1 for ShadowImage) in the
horcm.conf file correctly.
7-12
PairVol(L/R) Device_File
oradev1(L) c0t3d0
18 -
oradev1(R) c0t3d1
17 -
PairVol(L/R) Device_File
oradev1(L) c0t3d0
18 -
oradev1(R) Unknown
/dev/rdsk/c0t3d0
/dev/rdsk/c0t3d2
/dev/rdsk/c0t3d0
/dev/rdsk/c0t3d2
Data protection operations with CCI
Command Control Interface User and Reference Guide
M ,Seq#,LDEV#.P/S,Status, Seq#,P-
0 35013
0 35013
M ,Seq#,LDEV#.P/S,Status, Seq#,P-
0 35013
0 35013 ****..-
/dev/rdsk/c0t3d1
/dev/rdsk/c0t3d3
/dev/rdsk/c0t3d1
/dev/rdsk/c0t3d3
17..P-VOL COPY,
18..S-VOL COPY,
17..P-VOL COPY,
-, - - -