Hitachi VSP F1500 User And Reference Manual page 404

Executing/
Error message
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Table 9-46 SSB codes returned by raidcom add snap_pool
Executing/
Error message
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
9-80
raidcom delete pool
Error code
Async
SSB1 SSB2
2E21 8106
2E23 0008
2E30 0052
2E30 6003
2EE7 00EE
2EE7 00F9
2EE7 FEEC
2EF3 6002
B980 B903
raidcom add snap_pool
Error code
Async
SSB1 SSB2
2E00 0000
2E00 6000
2E00 6001
2E00 6002
2E10 000C
2E10 0009
2E10 0011
2E10 0050
Troubleshooting
Command Control Interface User and Reference Guide
Description
The operation cannot be performed because the
shared memory is not initialized.
The number of specified LDEVs is invalid.
The specified LDEV cannot be deleted because it is
a top VOL of the pool.
The specified pool is a pool for Thin Image or
Copy-on-Write Snapshot.
The command cannot be accepted. After a while,
execute the same command.
Pool ID is not installed.
An internal error occurred.
Call Hitachi Data Systems customer support.
The specified parameter is invalid. Check the
Command Control Interface Command Reference.
The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Description
The LDEV number is out of settable range.
Pool ID is out of range.
The type of pool is invalid.
The maximum reserve ratio for V-VOL is out of
range.
The operation cannot be performed because a
SATA-E drive in the state of quick formatting is in
the specified LDEV.
The specified LDEV is in the state of blocked.
The specified LDEV is in the state of blocked, or
not installed.
Thin Image cannot be used because there are not
enough cache management devices to create
pairs.