Hitachi VSP F1500 User And Reference Manual page 468

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
9-144
raidcom modify port -modify_iscsi_virtual_port
Error code
Async
SSB1 SSB2
B955 10B8
B955 10B9
B955 10BE
B955 10BF
B955 10C8
B955 10C9
B955 10CB
B955 10DB
B955 10FB
B955 10FD
B955 10FE
B955 1201
B955 1202
B955 1203
B955 1204
B955 1205
B955 1206
B955 120A
Troubleshooting
Command Control Interface User and Reference Guide
Description
The multicast address or the loop-back address
cannot be set as global address 1 for IPv6.
The multicast address or the loop-back address
cannot be set as the default gateway for IPv6.
The invalid value is specified for the Keep Alive
timer.
The VLAN tagging mode cannot be set because the
VLAN ID has not been entered yet.
To disable IPv6, delete the remote path for
avoiding the failure of remote copy.
The same IPv6 address cannot be set to the same
port redundantly.
The number of VLANs exceeds the maximum.
This command cannot be set due to one of the
following reasons:
• The specified value is invalid.
• No option is set when the port is changed to
IPv4 mode. See the Command Control
Interface Command Reference.
The attribute of the specified port is Initiator or
External.
If global address 1 for IPv6 is not set, you cannot
set global address 2 for IPv6 manually.
The multicast address or the loop-back address
cannot be set as global address 2 for IPv6.
The command cannot be executed because the
invalid virtual port number has been entered.
The command cannot be executed because the
iSCSI virtual port mode is OFF.
The same IPv6 address cannot be set to the same
virtual port redundantly.
The IPv6 global address 2 cannot be set for the
ports other than virtual port 0.
The command cannot be executed because the
RCU port or the iSCSI name of the iSCSI target for
the external storage system is registered for the
specified virtual port.
The command cannot be executed for virtual port
0.
An internal error occurred.