Execution Example - Hitachi VSP F1500 User And Reference Manual

LDEVs that are allocated to journals or pools must be migrated by users. We
recommend that you register LDEVs that are allocated to journals or pools as
device groups, and then operate after specifying them by the device groups.

Execution example

The following shows the execution example of registering LDEVs to the pool
as device groups, creating resource groups in the device group unit and
migrating created resource groups.
C:\HORCM\etc>raidcom add device_grp -device_grp_name dg_jnl1 data1 -
ldev_id 512 513 514 515
C:\HORCM\etc>raidcom get device_grp
LDEV_GROUP
dg_jnl1
C:\HORCM\etc>raidcom get device_grp -device_grp_name dg_jnl1
LDEV_GROUP
dg_jnl1
dg_jnl1
dg_jnl1
dg_jnl1
C:\HORCM\etc>raidcom add resource -resource_name rsg002 -grp_opt ldev -
device_grp_name dg_jnl1
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 512(0x0200)[1] ,
PORT = none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 513(0x0201)[1] , PORT
= none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 514(0x0202)[1] , PORT
= none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 515(0x0203)[1] , PORT
= none , LUN = none :done
C:\HORCM\etc>raidcom delete resource -resource_name rsg002 -grp_opt ldev -
device_grp_name dg_jnl1
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 512(0x0200)[1] ,
PORT = none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 513(0x0201)[1] , PORT
= none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 514(0x0202)[1] , PORT
= none , LUN = none :done
GROUP = dg_jnl1 , DEVICE = data1 , UnitID = 0 , LDEV = 515(0x0203)[1] , PORT
= none , LUN = none :done
Internal volume operations
Creating internal volumes (open-systems)
To create LDEVs of internal open-systems volumes and make the LDEVs
available to the host, perform the following provisioning operations.
Step
1
5-18
Operation
Setting port Enable LUN security of the port.
Modify settings such as port
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Serial#
64539
LDEV_NAME
data1
data1
data1
data1
Description
LDEV# Serial#
512 64539
513 64539
514 64539
515 64539
Command
raidcom modify port -port
<port#> -security_switch y