Hitachi VSP F1500 User And Reference Manual page 370

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
Table 9-21 SSB codes returned by raidcom add journal
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
9-46
raidcom delete journal
Error code
Async
SSB1 SSB2
2E30 0062
2E30 5002
2EE4 08E6
2EE4 50EE
B980 B903
raidcom add journal
Error code
Async
SSB1 SSB2
2E00 0000
2E00 0018
2E00 0023
2E00 8301
2E10 0000
2E10 0011
2E10 001A
2E10 001B
2E10 001C
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified volume cannot be used as a journal
volume because it is an external volume that can
execute the I/O suppression mode.
The specified journal cannot be deleted because
there are data volumes.
The command cannot be accepted. After a while,
execute the same command.
An internal error occurred.
Call Hitachi Data Systems customer support.
The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Description
The value of LDEV number is invalid.
A new journal volume cannot be registered
because the number of journal volume exceeds the
maximum that can be registered.
The specified volume capacity is too small.
The specified MP Blade ID is invalid.
The specified volume is already used by another
program product.
The specified volume is not installed or cannot be
used.
The specified volume is connected from the
mainframe host.
There is a PIN slot in the journal volume.
The specified volume cannot be registered as a
journal volume because it is in shredding. Wait
until the shredding operation is completed, then
retry the operation.