Hitachi VSP F1500 User And Reference Manual page 411

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
raidcom add snapshot
Error code
Async
SSB1 SSB2
2E10 0042
2E10 0045
2E10 0046
2E10 0049
2E10 004A
2E10 004E
2E10 0051
2E10 0052
2E10 0056
2E10 005B
Troubleshooting
Command Control Interface User and Reference Guide
Description
Provisioning V-VOL in capacity expanding is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
A pair cannot be created because the page discard
(reclaim zero pages) is being executed by a SCSI
command from the Host to the specified P-VOL.
A pair cannot be created because the P-VOL of a
TrueCopy pair is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
A pair cannot be created because the S-VOL of a
TrueCopy pair is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the
ShadowImage pair is being resynchronized when
the volume is shared between the P-VOL of a Thin
Image/Copy-on-Write Snapshot pair and the P-VOL
of a ShadowImage pair.
The command ends abnormally because the
ShadowImage pair status is other than PSUS when
the volume is shared between P-VOL of a Thin
Image/Copy-on-Write Snapshot pair and the S-VOL
of a ShadowImage pair.
The operation cannot be performed because the P-
VOL of the ShadowImage pair on which the Quick
Restore is being operated is specified as the P-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
The pair operation cannot be performed because
the volume which specifies the volume using two
mirrors cannot accept the specified command in
the following configurations using three Universal
Replicator sites.
• 3DC multi target configuration
• 3DC cascade configuration
• Delta resync configuration
A Thin Image pair cannot be created because the
pair status of all Thin Image pairs sharing the
specified P-VOL is PSUE.
The specified volume cannot be used for the Thin
Image pair operation because the virtual LDEV ID
is deleted.
The Thin Image pair operation cannot be
performed because the virtual storage machine of
the specified P-VOL is different from the virtual
storage machine of the specified S-VOL.
9-87