Virtual Storage Machine Operations - Hitachi VSP F1500 User And Reference Manual

Table 5-7 Server Priority Manager operations when an LDEV and a WWN or iSCSI name
Ste Operation
p overview
1 Setting SPM
information for an
LDEV and a WWN or
iSCSI name
2 Checking SPM
information
3 Displaying
monitoring
information of the
prioritized or non-
prioritized WWN
4 Changing the upper
limit of the prioritized
and non-prioritized
WWNs
5 Deleting from the
SPM target

Virtual storage machine operations

• Creating host groups in a virtual storage machine on page 5-68
• Adding LDEVs to a virtual storage machine on page 5-69
• Removing the virtual storage machine on page 5-70
Creating host groups in a virtual storage machine
Use the following provisioning operations to create host groups in a virtual
storage machine and to assign virtualized LDEV to LU.
5-68
of an HBA is specified
Description
Specify the LDEV number, and the
WWN or iSCSI name of the host bus
adapter to set the priority
(prioritized or non-prioritized) as
the SPM target.
To set the non-prioritized option,
set the upper limit as well.
Normally, set the prioritized option
in step 1, and check the monitoring
information in step 3. And then, if
necessary, change the priority to
non-priority in step 4, and set the
upper limit.
Display the setting status of SPM.
Display monitoring information.
If necessary, determine the priority
and the upper limit based on the
monitoring information, and then
change the priority.
When the non-prioritized option is
set, set the upper limit as well.
Specify the LDEV number and the
WWN or iSCSI name of the host bus
adapter to delete them from the
SPM target.
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Executed command
raidcom modify spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings> |
-hba_iscsi_name <initiator iscsi
name>} [ -spm_priority <y/n>] [{-
limit_io | -limit_kb | -limit_mb}
<value> ]
raidcom get spm_ldev [-ldev_id
<ldev#> | -hba_wwn <wwn strings>
| -hba_iscsi_name <initiator
iscsi name> ]
raidcom monitor spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings> |
-hba_iscsi_name <initiator iscsi
name>}
raidcom modify spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings>
| -hba_iscsi_name <initiator
iscsi name>} [-spm_priority <y/
n>] [{-limit_io | -limit_kb | -
limit_mb} <value>]
raidcom delete spm_ldev -ldev_id
<ldev#> {-hba_wwn <wwn strings>
| -hba_iscsi_name <initiator iscsi
name>}