Hitachi VSP F1500 User And Reference Manual page 440

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
9-116
raidcom add dp_pool
Error code
Async
SSB1 SSB2
2E30 000E
2E30 0010
2E30 0038
2E30 0039
2E30 005C
2E30 005D
2E30 005E
2E30 006C
2E30 006E
2E30 0071
2E30 0074
2E30 0085
2E30 0099
2E30 6000
2E30 6004
2E30 6013
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified LDEV is already used as a pool
volume.
The specified LDEV is a command device.
It cannot be used as a pool volume because the
size of the specified LDEV is less than 8GB.
Creating a pool or adding a pool volume cannot be
performed because CLPR is mixed in the specified
pool.
The specified LDEV is used as a V-VOL.
The specified LDEV is a volume of unsupported
Dynamic Tiering or active flash.
The specified LDEV is used in another program
product.
An LDEV, whose emulation type is not available to
be mixed, is in the specified LDEVs.
The operation cannot be performed for the
following reasons:
• The pool volumes to be added to the Dynamic
Tiering pool or active flash pool include
external volumes whose cache modes are
invalid.
• The Dynamic Provisioning pool includes both
external volumes whose cache modes are
invalid and internal volumes.
A pool volume cannot be added because the LDEV
of the resource group different from the resource
group of the pool volume to which the specified
pool belongs is specified.
The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
The specified volume cannot be used as a pool
volume.
The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
The threshold value 1 is out of range.
The specified pool attribute differs from the pool
attribute of existed pool.
The LDEV that belongs to the parity group which
accelerated compression is enabled cannot be