Other Ssb Codes Indicating Internal Errors - Hitachi VSP F1500 User And Reference Manual

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status

Other SSB codes indicating internal errors

The error codes (SSB1) listed below indicate internal errors. For your
confirmation, contact Hitachi Data Systems customer support.
raidcom modify drive command
Error code
Async
SSB1 SSB2
2E11 0058
2E11 8012
2E11 8013
2E11 8102
2E11 810A
2E11 8200
2E11 8201
2E11 8301
2E11 8302
2E11 8311
2E11 8312
2E11 8400
2E11 9400
2E11 9A00
2E11 9A01
2E20 8501
2EC4 FEEC
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified operation cannot be performed
because the specified drive is used as a spare
drive.
The specified operation cannot be performed
because the power condition of the drive box is
abnormal.
The specified operation cannot be performed
because storage system is in process.
The specified operation cannot be performed
because cache memory is blocked.
The specified operation cannot be performed
because the cache status is abnormal.
The specified operation cannot be performed
because the MP unit is being transferred.
The specified operation cannot be performed
because the MP unit is blocked.
The specified operation cannot be performed
because DKB is being transferred.
The specified operation cannot be performed
because CHB is being transferred.
The specified operation cannot be performed
because DKB is blocked.
The specified operation cannot be performed
because CHB is blocked.
The specified operation cannot be performed
because the port is blocked.
The command cannot be accepted. After a while,
execute the same command.
The encryption key cannot be obtained from the
key management server.
The specified operation cannot be performed
because the unused encryption keys have run out.
The specified drive is not installed.
An internal error occurred. Contact Hitachi Data
Systems customer support.
9-197