Starting Up On Windows Systems - Hitachi VSP F1500 User And Reference Manual

For C shell:
# setenv HORCMINST X
5 Set the log directory (HORCC_LOG) in the command execution
.
environment as needed.
6 If you want to perform TrueCopy operations, do not set the
.
HORCC_MRCF environment variable. If you want to perform
ShadowImage operations, set the HORCC_MRCF environment variable
for the CCI execution environment.
For B shell:
# HORCC_MRCF=1 # export HORCC_MRCF
For C shell:
# setenv HORCC_MRCF 1 # pairdisplay -g xxxx
xxxx = group name

Starting up on Windows systems

One instance
To start up one instance of CCI on a Windows system:
1 Modify %windir%\system32\drivers\etc\services to register the
.
port name/number (service) of the configuration definition file. Make the
port name/number the same on all servers:
horcm xxxxx/udp xxxxx = the port name/number of horcm.conf
2 If you want CCI to start automatically each time the system starts up,
.
add \HORCM\etc\horcmstart to the system automatic startup file (for
example, \autoexec.bat).
3 Execute the horcmstart script manually to start CCI: D:\HORCM\etc>
.
horcmstart
4 Set the log directory (HORCC_LOG) in the command execution
.
environment as needed.
5 If you want to perform TrueCopy operations, do not set the
.
HORCC_MRCF environment variable. If you want to perform
ShadowImage operations, set the HORCC_MRCF environment variable
for the CCI execution environment:
D:\HORCM\etc> set HORCC_MRCF=1 D:\HORCM\etc> pairdisplay
-g xxxx
xxxx = group name
Two instances
To start up two instances of CCI on a Windows system:
1 Modify %windir%\system32\drivers\etc\services to register the
.
port name/number (service) of the configuration definition files. Make
sure that the port name/number is different for each instance:
horcm0 xxxxx/udp
Starting up CCI
Command Control Interface User and Reference Guide
4-3