Ssb Codes Returned By The Configuration Setting Command (Raidcom) - Hitachi VSP F1500 User And Reference Manual

Table 9-7 SSB codes returned by the pairsplit command
Executing/
Error message
CMDRJE Executing
Table 9-8 SSB codes returned by the pairsplit -S command
Executing/
Error message
CMDRJE Executing

SSB codes returned by the configuration setting command (raidcom)

Executing the configuration setting command (raidcom command) can return
an SSB code. An error can occur whether the command is executed
synchronously or asynchronously. For an asynchronous error, the error
information is displayed on the console by executing raidcom get
command_status command. When the error message shows "CMDRJE" or
"Get Command Status", check the contents of SSB1 and SSB2. You can verify
a content of an error by the raidcom get error_message command. When you
specify the SSB code with the raidcom get error_message command, make
sure not to specify a wrong SSB code.
The following tables provide information about each SSB code returned by
the configuration setting command (raidcom command). If you see an error
not described in the tables, contact Hitachi Data Systems customer support.
Table 9-9 SSB codes returned by the configuration setting command (common)
Executing/
Error message
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
9-24
Error code
Async
SSB1 SSB2
B980 B901
pairsplit -S
Error code
Async
SSB1 SSB2
B980 B901
Error code
Async
SSB1 SSB2
2E10 8000
2E11 2205
Troubleshooting
Command Control Interface User and Reference Guide
pairsplit
The command was rejected because the specified
port is for NAS Platform (System LU).
The command was rejected because the specified
port is for NAS Platform (System LU).
common
The operation cannot be performed because
Storage Navigator or Device Manager - Storage
Navigator is in progress, another application is in
progress on the SVP, or the configuration is being
changed. Wait a while, and then retry the
operation.
The resource group to which the operation object
belongs is locked by the other user.
Description
Description
Description