Script Examples - Hitachi VSP F1500 User And Reference Manual

Step
22
23
24
25
26
*After registering the iSCSI name of the iSCSI target for an external storage system,
perform the login test to check if you can log in to the iSCSI target correctly. If iSCSI
targets to which you cannot log in correctly due to a security setting error are registered,
attempts to check connections are made while external volumes are being searched. As
a result, external volumes and networks are loaded, and recognizing an external volume
might fail. For all iSCSI targets for which login test fails, change the CHAP authentication
information for connecting to the iSCSI target of the external storage system, or check
external storage system settings. After that, perform the login test again to make sure
that the test is successful. In addition, delete unnecessary iSCSI targets using raidcom
delete external_iscsi_name.

Script Examples

The following shows the script examples of external volume operations.
5-50
Operation
overview
Setting LDEV Set a nickname of the created
nicknames LDEV.
(arbitrary)
This operation is arbitrary.
Setting the MP Set the MP blade of the created
blade of an LDEV.
LDEV
Displaying Display information of the
LDEV created LDEV and confirm the
information result of executing the
command.
Creating an LU Specify the port, map the LDEV
path to the LUN, and create an LU
path.
Displaying LU Display LU path information,
path and confirm the result of
information executing the command.
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Description Executed command
[-location <lba>]
[-mp_blade_id <mp#>]
raidcom modify ldev
-ldev_id <ldev#>
-ldev_name <ldev naming>
raidcom modify ldev
-ldev_id <ldev#>
-mp_blade_id <mp#>
raidcom get ldev
-ldev_id <ldev#> ...
[-cnt <count>]
[-key <keyword>]
raidcom add lun
-port <port#>
[<host group name>]
-ldev_id <ldev#>
[-lun_id<lun#>]
raidcom get lun
-port <port#>
[<host group name>]