Hitachi VSP F1500 User And Reference Manual page 450

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
9-126
raidcom delete ldev
Error code
Async
SSB1 SSB2
2E11 0004
2E11 0005
2E11 001B
2E11 0053
2E11 0102
2E11 0153
2E11 0202
2E11 6004
2E11 6008
2E11 8004
2E11 800F
2E11 8010
2E11 8108
2E11 9400
2E20 0000
2E30 0007
2E30 000A
2E30 000C
2E30 000E
Troubleshooting
Command Control Interface User and Reference Guide
Description
An LDEV that is in the state of formatting is
included in the parity group of the target LDEV.
An LDEV that is in the state of executing quick
format is included in the parity group of the target
LDEV.
The specified LDEV is blocked.
The specified LDEV is used in another operation.
The parity group of the target LDEV is in the state
of correction copy.
The parity group or the external volume group that
the specified LDEV is belongs to is used in another
operation.
The external volume group with the Data Direct
Mapping attribute which is allocated to the
specified LDEV is not in the state of disconnected.
The operation cannot be performed because pools
are blocked.
The operation cannot be performed because the
pool linked with the specified LDEV is in the
unusable status.
The operation cannot be performed because the
internal processing is in progress.
The operation failed because multiple versions of
DKCMAIN microcode are included.
The storage system is in internal process, or the
configuration changing processes are conflicting.
The operation cannot be performed because there
is blocked part in the system.
The command cannot be accepted. After a while,
execute the same command.
LDEV is not installed.
An LU path has been defined.
The specified LDEV is used for a Dynamic
Provisioning.
The specified LDEV is used as a quorum disk.
The specified LDEV is used as a pool volume.