Accessing Version Information In Deployment Settings; A Browser Does Not Import A Deployment Profile Correctly; Some Legacy Bios Mode Installs Need Specific Instructions; Always On Intelligent Provisioning Does Not Display Status Of Nics - Hitachi HA800 Series User Manual

Action
OS Host name has been replaced with the Computer name which performs the same function.

Accessing version information in deployment settings

Symptom
Version information for the Deployment settings utility is blank.
Cause
Version information is no longer located in the Deployment settings utility.
Action
Click the System Information icon at the top of the screen for version information.

A browser does not import a deployment profile correctly

Symptom
Intelligent Provisioning does not import a deployment profile correctly.
Action
Verify that the profile is saved as a .txt file format.

Some Legacy BIOS Mode installs need specific instructions

If the server boot mode is set to Legacy BIOS Mode, some operating systems need specific installations.
NOTE: Legacy BIOS Mode behavior cannot be modified by pressing F10. If you are doing a manual
installation in Legacy BIOS Mode, ensure that:
• On Windows systems, the system boots to the DVD.
• On Linux and VMware systems, the system boots to the hard drive.
NOTE: Change the boot order, or press F11 during the boot process.

Always On Intelligent Provisioning does not display status of NICs

Symptom
When viewing NICs in Always On Intelligent Provisioning, the NIC does not display the status.
Action
1. Check the status of the NIC options in the iLO page or RBSU.
2. Select the port in AOIP, and then continue with the installation.
Troubleshooting 53