Raidscan -Find Verify [Mu#] - Hitachi VSP F1500 User And Reference Manual

Command control interface guide
Hide thumbs Also See for VSP F1500:
Table of Contents

Advertisement

normally need to use this option. This option issues an Inquiry to a device file
from the result of STDIN. Then CCI gets Ser# and LDEV# from the RAID
storage system. Subsequently, CCI compares the Inquiry result to the
contents of horcm.conf, and the result is stored within HORCM for the
instance. At the same time CCI shows the result of this option about the
relation. This option will also be terminated to avoid wasteful scanning after
registration based on horcm.conf, because HORCM does not need the
registration any more.
# ioscan
DEVICE_FILE
SERIAL
/dev/rdsk/c0t3d0
35013
/dev/rdsk/c0t3d0
35013
Note: When multiple device files share the same LDEV, the first device file is
registered to the LDEV map table.

raidscan -find verify [MU#]

This option shows the relation between group on horcm.conf and Device_File
registered to the LDEV map tables from DEVICE_FILE of STDIN.
# ioscan
DEVICE_FILE
SERIAL
/dev/rdsk/c0t3d0
35013
/dev/rdsk/c0t3d1
35013
/dev/rdsk/c0t3d2
35013
Note: It shows shared LDEV among multiple device files, if there is a
difference between DEVICE_FILE and Device_File. You can also use this
option to the command device that specified non-protection mode. It is used
for the purpose to see the relation between DEVICE_FILE and the group of
horcm.conf.
raidscan -f[d]
This option shows the Device_File that was registered on the group of
HORCM, based on the LDEV (as defined in the local instance configuration
definition file).
# raidscan -p
Port# ,TargetID#,Lun#..Num(LDEV#....)...P/S,
Status,Fence,LDEV#,Device_File
CL1-D ,
CL1-D ,
-fun | grep rdsk | raidscan -find inst
Group
LDEV
oradb
17
oradb
17
-fun | grep rdsk | raidscan -find verify -fd
Group
LDEV
oradb
17
oradb
18
-
19
cl1-d
-fd
3,
0...1(17)............SMPL
3,
1...1(18)............SMPL
Data protection operations with CCI
Command Control Interface User and Reference Guide
PairVol
PORT
oradev1
CL1-D
oradev1
CL1-D
PairVol
Device_File
oradev1
c0t3d0
oradev2
Unknown
-
-
-
- -,c0t3d0
-
- -,c0t3d1
TARG
LUN M
3
0 -
3
0 0
M
0
0
0
7-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents