Configuration Check - Hitachi VSP F1500 User And Reference Manual

Check with deletion operation
It is checked to ensure that the operation is not intended to be performed for
the host group that is already deleted. If the host group is already deleted,
an error is detected.
If it is not clear whether the target port or host group exists or not (if the
target port or host group information does not exist in the configuration
definition file), the error is not detected.
The command as the target of the check is shown below.
•
raidcom delete host_grp -port <port#> [<host group name>]
For example, if the host group that does not exist is attempted to be deleted,
an error is detected. An example of the script where the error is detected and
the execution result of the actual context check are shown below.
• Example of script (the text in bold indicates the part of incorrect
configuration definition.)
raidcom delete host_grp -port CL1-A-0
raidcom delete host_grp -port CL1-A-1
raidcom delete host_grp -port CL1-A-2
• Execution result (the text in bold indicates the contents of the error
accompanying the invalid configuration definition in the script.)
C:\HORCM\etc>raidcom get host_grp -port CL1-A -store hostgrpcnf_27_cl1-a.dat
PORT GID GROUP_NAME Serial# HMD HMO_BITs
CL1-A 0 1A-G00 64539 LINUX/IRIX
C:\HORCM\etc>raidcom -zt 6_no_hstgrp.bat -load hostgrpcnf_27_cl1-a.dat
-checkmode precheck
C:\HORCM\etc>raidcom delete host_grp -port CL1-A-0
C:\HORCM\etc>raidcom delete host_grp -port CL1-A-1
raidcom: PORT-HGRP(0-1) does not exist as status is [2] on UnitID# 0.
raidcom_#3: [EX_CTXCHK] Context Check error
C:\HORCM\etc>raidcom delete host_grp -port CL1-A-2
raidcom: PORT-HGRP(0-2) does not exist as status is [2] on UnitID# 0.
raidcom_#4 : [EX_CTXCHK] Context Check error

Configuration check

The contents of a script file can be checked whether the operation is
performed for the existing resource or not.
Before performing the configuration check, execute the following command,
acquire the current configuration information, and store it in the work file
specified by the -store option.
Check the operation for LDEV
CCI functions
Command Control Interface User and Reference Guide
3-33