Hitachi VSP F1500 User And Reference Manual page 363

Table 9-19 SSB codes returned by raidcom add ldev
Executing/
Error message
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
raidcom add ldev
Error code
Async
SSB1 SSB2
2E00 0000
2E00 0002
2E00 0003
2E00 000D
2E00 000E
2E00 0010
2E00 0013
2E00 0014
2E00 0019
2E00 001A
2E00 001C
2E00 0025
2E00 0026
2E00 0027
2E00 002D
2E00 002F
2E00 0030
Troubleshooting
Command Control Interface User and Reference Guide
Description
The LDEV number is out of settable range.
The specified capacity is not in the effective range.
SSID is not in the effective range.
The value of the specified emulation type is invalid.
The specified emulation type is not supported in
this command.
The operation cannot be performed because the
specified LDEV number is already used.
The operation cannot be performed because there
are not enough cache management devices.
Cannot create because the specified capacity is
invalid.
The capacity in the case of specifying a emulation
type of the mainframe series must be dividable by
the cylinder.
The capacity when 3390-V emulation type is
specified must be divisible by page unit.
When you specify emulation type for open system,
you cannot specify the size by the cylinder.
The following external volume cannot be created
because the capacity which is specified with LBA is
not same as the size of the external volume group.
• An external volume for the online data
migration.
• An external volume having the Data Direct
Mapping attribute.
The capacity must be specified because LDEVs are
in the parity group (or the external volume group).
The capacity must be specified.
The emulation type of the mainframe cannot be
specified because the virtual volume is set for the
specified LDEV.
The specified value of the Full Allocation is invalid.
Full Allocation cannot be specified to the specified
LDEV because the emulation type is not supported.
9-39