Hitachi VSP F1500 User And Reference Manual page 474

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Table 9-100 SSB codes returned by raidcom disconnect path
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Executing/
Status Async
CMDRJE
Get Command Executing/
Status Async
9-150
raidcom modify host_grp
Error code
Async
SSB1 SSB2
B958 098E
B980 B901
B980 B902
B980 B903
raidcom disconnect path
Error code
Async
SSB1 SSB2
2E00 4500
2E00 8400
2E02 8403
2E10 4301
2E10 8404
2E11 001B
2E11 4000
2E11 4302
2E11 9400
2E20 4100
2E20 4300
Troubleshooting
Command Control Interface User and Reference Guide
Description
When using 8FC16 or 16FE10 channel package,
you cannot configure the host mode option 51
(Round Trip Set Up Option) for the host group
because the host mode option 51 is not supported.
The command was rejected because the specified
port is for NAS Platform (System LU).
The command was rejected because the specified
port is for NAS Platform (User LU).
The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Description
The path group is out of the enabled range.
The value of the specified port is invalid.
The specified virtual port number is out of range.
The specified external path has already
disconnected the path, or is in the process of
checking path.
The iSCSI virtual port mode for the specified port
is disabled.
The target LDEV is blocked.
The path for the specified external path is in the
state of disconnected.
This command cannot be operated due to one of
the following reasons:
• All the paths to the external volumes are
blocked.
• There will be no normal paths.
The command cannot be accepted. After a while,
execute the same command.
There is no specified external volume.
There is no connection path to an external volume.