Hitachi VSP F1500 User And Reference Manual page 390

Executing/
Error message
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
Table 9-38 SSB codes returned by raidcom modify ldev -quorum_disable
Executing/
Error message
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
9-66
raidcom modify ldev -quorum_enable
Error code
Async
SSB1 SSB2
2E21 810A
2E30 0005
2E30 0007
2E30 000E
2E30 000F
2E30 0010
2E30 004E
2E30 0074
2E30 008E
2E30 0092
2E30 0099
2EE8 FEEC
raidcom modify ldev -quorum_disable
Error code
Async
SSB1 SSB2
2E00 0000
2E10 A002
2E10 A003
2E10 A004
Troubleshooting
Command Control Interface User and Reference Guide
Description
A shared memory is not installed.
Cache Residency Manager is set to the specified
volume.
A path is defined to the specified volume.
The specified LDEV is used as a pool volume.
The specified LDEV is used as a journal volume.
The specified volume is used as a command
device.
Data Retention Utility is set to the specified
volume.
The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
The emulation type of the specified LDEV is not
OPEN-V.
The specified LDEV cannot be used because the
size of LDEV is less than the minimum capacity of
the quorum disk.
The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
Internal error occurred.
Description
The LDEV number is out of settable range.
The specified LDEV is not a quorum disk.
The specified quorum disk is in processing.
The pair using the specified quorum disk exists.