Hitachi VSP F1500 User And Reference Manual page 380

Executing/
Error message
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
CMDRJE Executing
Table 9-30 SSB codes returned by raidcom modify ldev -command_device
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
9-56
raidcom initialize ldev
Error code
Async
SSB1 SSB2
2E30 0074
2E30 0075
2E30 0206
2E30 0209
2E31 0001
2E31 0017
2EE8 00EE
2EE8 0A18
2EE8 FEEC
2EE8 FFFF
2EF3 0002
B980 B903
raidcom modify ldev -command_device
Error code
Async
SSB1 SSB2
2E10 0000
2E10 0001
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
The specified ldev is used as the TSE-VOL.
The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
The operation cannot be performed because the
specified LDEV is a volume for which capacity
saving setting is enabled.
Maintenance work cannot be performed because
the target LDEV is a quorum disk.
LDEV cannot be formatted because there is no
normal external path.
The command cannot be accepted. After a while,
execute the same command.
An internal error occurred.
An internal error occurred.
Call Hitachi Data Systems customer support.
An internal error occurred.
Call Hitachi Data Systems customer support.
The specified parameter is incorrect. Check the
Command Control Interface Command Reference.
The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Description
The command device cannot be set to the specified
LDEV because of the following causes.
• The LDEV is used for a ShadowImage pair.
• The reserve attribute of a ShadowImage is
configured.
The specified LDEV is used for a TrueCopy pair.