Hitachi VSP F1500 User And Reference Manual page 460

Executing/
Error message
CMDRJE Executing
Table 9-77 SSB codes returned by raidcom modify port -ipv6_global_address2
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Table 9-78 SSB codes returned by raidcom modify port -ipv6_local_address
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
9-136
raidcom modify port -ipv6_global_address
Error code
Async
SSB1 SSB2
B955 120E
raidcom modify port -ipv6_global_address2
Error code
Async
SSB1 SSB2
B955 1039
B955 10C9
B955 10FD
B955 10FE
B955 120E
raidcom modify port -ipv6_local_address
Error code
Async
SSB1 SSB2
B955 1039
B955 10B6
B955 10C9
B955 120E
Troubleshooting
Command Control Interface User and Reference Guide
Description
The command cannot be executed because the
iSCSI virtual port mode is ON.
Description
The command device being used at the local CCI
exists under the port.
The same IPv6 address cannot be set to the same
port redundantly.
If global address 1 for IPv6 is not set, you cannot
set global address 2 for IPv6 manually.
The multicast address or the loop-back address
cannot be set as global address 2 for IPv6.
The command cannot be executed because the
iSCSI virtual port mode is ON.
Description
The command device being used at the local CCI
exists under the port.
The invalid value is specified for the link local
address of IPv6.
The same IPv6 address cannot be set to the same
port redundantly.
The command cannot be executed because the
iSCSI virtual port mode is ON.