Hitachi VSP F1500 User And Reference Manual page 341

Error Error
code message
EX_EPPE Permissio The specified command
RM n denied device does not have an
with the authority to execute this
privilege command.
EX_ENQC Unmatche The specified command
LP d CLPR device does not have an
with JNL authority to execute this
and command.
Volume
EX_CTXC Context An error is detected by the
HK check Context Checking.
error
EX_EACC Access The resource that you
ES denied specified to lock or unlock
with has already been used by
Lock/ another user.
Unlock
EX_ENAU Authentic User authentication failed at
TH ation the authentication command
failed device.
with User
EW_INVA Invalid Invalid option or an
RG argument argument of the option.
EW_INVO Invalid Invalid argument of an
PA option option
argument
EW_INVO Invalid Invalid option.
PT option
EW_LNG Argument The number of character for
ARG too long action, object, option or
argument of option exceeded
the maximum.
EW_MAX Maximum The total number of option
ARG argument or the argument of option
exceeded the maximum.
EW_ENFI No such The specified file dies not
LE file exist.
Condition
Troubleshooting
Command Control Interface User and Reference Guide
Recommended action
• The attribute of the port is not
Target (TAR) or RCU Target (RCU).
• LUN security is invalid.
• The specified host group is not
installed.
• The specified virtual port ID is not
correct.
Check the operation authentication.
Check the operation authentication.
Check if the operation by the command
executes a proper procedures and has
the consistency or not.
Check if the specified resource is used
by such as Storage Navigator or Device
Manager - Storage Navigator or not.
Check the user ID and password.
User -h option to check the correct
option, and specify it.
Use -h option to check the correct
option and use it.
Use -h option to check the correct
option and use it.
Specify the number of characters of
action, object, option, an argument of
option, or the total number of
characters are to be appropriate number
of characters.
Check the total number of option or
argument of option.
Check if the specified file exist or not,
and specify the correct file.
Returne
d Value
203
204
199
200
202
253
131
131
131
131
131
9-17