Hitachi VSP F1500 User And Reference Manual page 349

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Error code
Async
SSB1 SSB2
2E11 2206
2E11 2207
2E11 8303
2E31 9100
2E3F 8000
2EBE 9E01
2EF3 9300
2EF3 9F02
2EF4 0026
2EFF FF00
B90F B90F
B954 FF5F
B9EC B9EC
B9EE B9EE
B9FD B90A
B9FD B90C
Troubleshooting
Command Control Interface User and Reference Guide
common
You do not have the operation authority for the
target resource group. Specify the resource group
that is allocated to the user group as the operation
target, or set the operation authority to the user
group in order to operate the target resource
group.
The system is locked by another user.
The command cannot be executed because there is
blocked part in the system.
The command cannot be executed because the
user authentication is not performed.
The specified operation is not supported in the
current microcode version.
The specified parameter is invalid. Check the
Command Control Interface Command Reference .
The specified command cannot be executed due to
the following reasons:
• The command cannot be accepted because it
is not supported.
• The command is not supported in the current
CCI version.
The specified operation is not supported in the
current microcode version.
The virtual storage machine with the specified
serial number is not found.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
The specified operation is not supported in the
current microcode version.
Description
9-25