Setting Up Drives - Siemens SINUMERIK 840D sl Operating Manual

Managing programs
11.12 Set up drives
11.12.2

Setting up drives

The "Set Up Drives" window is available in the "Start-up" operating area for configuring the
softkeys in the Program Manager.
Note
Reserved softkeys
Softkeys 4, 7 and 16 are not available to be freely configured.
File
The created configuration data is stored in the "logdrive.ini" file. This file is located in the
/user/sinumerik/hmi/cfg directory.
General information
Entry
Drives 1 - 24
Type
282
Machine manufacturer
Please refer to the machine manufacturer's specifications.
No drive
NC program memory
USB local
USB global
NW Windows
NW Linux
Local drive
FTP
User cycles
Manufacturer cycles
Drive Windows
Meaning
No drive defined.
Access to the NC memory.
Access to the USB interface of the active
operator unit.
All of the TCUs in the plant network can ac-
cess the USB memory medium.
Network drive in Windows systems.
Network drive in Linux systems.
Local drive.
Hard disk or user memory on the Compact-
Flash card.
Access to an external FTP server.
The drive cannot be used as global part pro-
gram memory.
Access to the user cycle directory of the
CompactFlash card.
Access to the manufacturer cycle directory of
the CompactFlash card.
Access to a local PCU/PC directory.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal