Tool Details - Siemens SINUMERIK 840D sl Operating Manual

Tool management

10.9 Tool details

10.9 Tool details
10.9.1 Displaying tool details
All of the parameters of the selected tool are listed in the "Tool Details - All Parameters"
window.
The parameters are displayed, sorted according to the following criteria
● Tool data
● Grinding data (if grinding tools have been configured)
● Cutting edge data
● Monitoring data
Protection level
You require access level, key switch 3 (protection level 4) in order to edit the parameters in
the detail window.
Procedure
...
242
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list, the wear list, the OEM tool list or the magazine is opened.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkey.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window is displayed.
All of the available tool data is displayed in the list.
4. Press the "Grinding data" softkey if you want to display the grinding
data.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal