Instrument Disinfection; Disinfection Solutions - tecan infinite 200 Instructions For Use Manual

9.3 Instrument Disinfection

9.3.1

Disinfection Solutions

2008-07
All parts of the instrument that come into contact with the patient samples,
positive control samples or hazardous material must be treated as potentially
infectious areas.
THE DISINFECTION PROCEDURE SHOULD BE PERFORMED
ACCORDING TO NATIONAL, REGIONAL, AND LOCAL REGULATIONS.
ALL PARTS OF THE INSTRUMENT THAT COME INTO CONTACT WITH
POTENTIALLY INFECTIOUS MATERIAL MUST BE TREATED AS
POTENTIALLY INFECTIOUS AREAS.
IT IS ADVISABLE TO ADHERE TO APPLICABLE SAFETY
PRECAUTIONS, (INCLUDING THE WEARING OF POWDER-FREE
GLOVES, SAFETY GLASSES AND PROTECTIVE CLOTHING) TO AVOID
POTENTIAL INFECTIOUS DISEASE CONTAMINATION WHEN
PERFORMING THE DISINFECTION PROCEDURE.
Before the instrument is returned to the distributor for servicing, it must be
disinfected and a disinfection certificate completed. If a disinfection certificate is
not supplied, the instrument may not be accepted by the servicing center or it
may be held by the customs authorities.
The instrument should be disinfected using the following solution:
•
B30 (Orochemie, Max-Planck-Str. 27; D-70806 Kornwestheim)
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
9. Cleaning and Maintenance
WARNING
WARNING
149