Transport And Storage; Transport; Storage; Power Requirements - tecan infinite 200 Instructions For Use Manual

3.3 Transport and Storage

3.3.1

Transport

3.3.2

Storage

3.4 Power Requirements

STOP
2008-07
®
The must be shipped using the original packing and installed
infinite 200
transport locks. Before shipping the instrument, it must be thoroughly disinfected
(see 9.3 Instrument Disinfection).
Before storing the instrument the injectors must be rinsed using a wash
procedure (see 2.3.4 Priming and Washing of the infinite® 200). Select a location
to store the instrument that is flat, level, vibration free, away from direct sunlight,
and free from dust, solvents and acid vapors
Storage Specifications
Temperature
Relative Humidity
The instrument is auto sensing and it is therefore not necessary to make any
changes to the voltage range. Check the voltage specifications on the rear panel
of the instrument and ensure that the voltage supplied to the instrument is correct
to this specification.
The voltage range is 100-120/220-240V.
If the voltage is not correct, please contact your distributor.
Do not use the instrument if the voltage setting is not correct.
If the instrument is switched ON with the incorrect voltage
IF THE INSTRUCTIONS GIVEN IN THIS DOCUMENT ARE NOT
CORRECTLY PERFORMED, THE INSTRUMENT WILL EITHER BE
DAMAGED OR THE PROCEDURE WILL NOT BE PERFORMED
CORRECTLY AND THE SAFETY OF THE INSTRUMENT IS NOT
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
- 20 °C to + 60 °C
< 90 % non condensing
Caution
setting it will be damaged.
WARNING
GUARANTEED.
3. Installation
-4 °F to + 140 °F
51