tecan infinite 200 Instructions For Use Manual page 34

2. General Description
STOP
STOP
34
Waste tub:
Click the 'Empty Waste tub' button and the plate carrier will move out
automatically. Remove the waste tub and empty the contents. After the waste tub
has been emptied place it back on the plate carrier. The i-Control software will
alert you when the waste tub needs to be emptied again.
Place the waste tub on the plate transport before starting a
measurement with the actions 'injection' and/or 'dispense'.
It is recommended to empty the waste tub before starting a
measurement and to empty it at least once a day.
BIOLOGICAL HAZARDS CAN BE ASSOCIATED WITH THE WASTE
MATERIAL (MICROPLATE) OF THE PROCESSES
TREAT THE USED MICROPLATE, OTHER DISPOSABLES, AND ALL
SUBSTANCES USED, IN ACCORDANCE WITH GOOD LABORATORY
INQUIRE ABOUT APPROPRIATE COLLECTING POINTS AND APPROVED
METHODS OF DISPOSAL IN YOUR COUNTRY, STATE OR REGION.
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
Caution
Caution
WARNING
®
RUN ON THE
infinite
PRACTICE GUIDELINES.
.
200
2008-07