Removal Of The Transport Locks - tecan infinite 200 Instructions For Use Manual

3.2 Removal of the Transport Locks

STOP
2008-07
Remove the transport lock before operating the instrument.
The instrument is delivered with the plate carrier and filter carrier/cuvette carrier
locked into place, so that they cannot be damaged. Before the instrument can be
used, the transport locks must be removed using the following procedure:
1. Ensure that the instrument is disconnected from the main power supply.
2. Open the plate carrier door and filter carrier/cuvette carrier door.
3. Remove the screw from the transport lock, which extends into the filter
carrier/cuvette carrier compartment from the plate carrier compartment
(left transport lock in picture above).
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
Caution
3. Installation
49