Armrest - Permobil M1 Service Manual

Permobil M1
Panel holder bracket height is adjustable. The panel holder bracket can
also be flipped to alter the base position further.
When the preferred position is reached, tighten the two screws and
washers. Tightening torque: 4.2 lb.ft.
Mount the panel holder; see .

Armrest

Figure 409.
WARNING!
Risk of injury while adjusting armrests
Do not subject the armrests to load while adjusting.
Adjusting armrest height and angle
The following tools are necessary for this task:
• 1 Torque wrench.
• Allen key, 6 mm.
Figure 407. Height adjustment.
Figure 408. Flipping the bracket.
A. Armrest Corpus.
B. Armrest PS.
Adjustments
137