Permobil M1 Service Manual page 63

Permobil M1
2. Check the documentation of the cable setup into the ISM. The
cable setup can vary between different configurations.
3. Route the cable according to the configuration.
4. Switch On the main power switch on the control panel.
5. Switch the main circuit breaker to On. See
Main circuit breaker , Page 79.
6. Mount back the front cover and the top cover, see
Removing chassis covers , Page 14.
Figure 179. Check the documentation.
Figure 180. Cable routing with the ESP.
Figure 181. Cable routing without the ESP.
Figure 182. On/Off symbol depending on model.
Repairs
63