Permobil M1 Service Manual page 65

Permobil M1
1. Connect the control panel cable. Route the cable according to the
picture.
2. Connect the cable connecting the ESP and the ISM together.
Route the cable according to the picture.
3. Switch On the main power switch on the control panel.
4. Switch the main circuit breaker to On. See
Main circuit breaker , Page 79.
5. Mount back the front cover and the top cover, see
Removing chassis covers , Page 14.
Removing ISM/ESP holder
1. Remove the cables from the cable holder.
2. Remove the ESP (Enhanced Steering Performance), see
Removing ESP , Page 64.
3. Remove the ISM (Intelligent Seating Module), see
Removing ISM , Page 62.
4. Remove two screws securing the holder.
5. Remove the holder.
Figure 187. The control panel cable and its connection
into the ESP.
Figure 188. The ISM cable its connection into the ESP
and the ISM.
Figure 189. On/Off symbol depending on model.
Figure 190. The screws securing the holder to the seat
post.
Repairs
65