Permobil M1 Service Manual page 125

Permobil M1
Adjusting ROHO® AGILITY® backrest depth
1. Loosen but do not remove screws (A) on each side.
2. Slide backrest forward/backward to desired position. Use grading
on holder to ensure that both sides are aligned.
3. Tighten screws (A) on each side. Tightening torque: 5.2 lb.ft
Backrest frame angle
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 5 mm.
WARNING!
Risk of injury while adjusting backrest
Do not place any weight or load on the backrest while adjusting the backrest.
Adjusting backrest frame angle
1. Secure the backrest by holding it in place before loosen either of the
screws, A and B.
2. Loosen the two screws A and B indicated by the arrows.
3. Adjust the backrest to the required angle.
4. Secure the lever by tightening the screws. Tightening torque
7.2 ft lb.
5. Check that the backrest is locked in position.
Figure 369. Adjusting ROHO® AGILITY® backrest
depth.
Figure 370. Adjusting backrest frame angle.
Adjustments
125