Permobil M1 Service Manual page 77

Permobil M1
Removing power module
1. Switch Off the main power switch on the control panel.
2. Switch the main circuit breaker to Off. See
Main circuit breaker , Page 79.
3. Remove the chassis covers, see Covers , Page 14.
4. Document the connections going into the power module.
5. Disconnect the connections.
6. Remove the main circuit breaker, see Main circuit breaker , Page 79.
7. Remove the two nuts securing the power module.
8. Remove the power module.
Figure 235. On/Off symbol depending on model.
Figure 236. Document the connections.
Figure 237. The nuts securing the power module.
Figure 238. Pull it straight out.
Repairs
77