Permobil M1 Service Manual page 94

Repairs
1. Remove the screw and washer from the inside of the armrest lock.
2. Unscrew the screw holding the armrest's joint.
3. Remove the bushing and the joint's two washers.
4. Remove the armrest arm.
5. Remove the slide bearing and washer.
6. Remove the armrest pad bracket together with armrest pad and
control panel from the armrest arm, see page 91.
Mounting armrest arm
1. Attach the armrest pad bracket together with armrest pad and
control panel onto the new armrest arm, see
Mounting armrest pad bracket , page 92.
2. Remove the transportation wing nut and dispose it.
94
Figure 287. The inside of the armrest lock.
Figure 288. The outer parts of the armrest joint.
Figure 289. The inner parts of the armrest joint.
Figure 290. The transportation wing nut.
Permobil M1