Permobil M1 Service Manual page 87

Permobil M1
1. Unscrew the two screws on each side (B) holding the backrest (C).
2. Remove the backrest.
Curved solid backrest plate install
1. Assemble the backrest (C) to the backrest frame (A). Fasten the
screws (B). Tightening torque: 7.2lb.ft.
Backrest frame
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 4 mm.
• Allen socket, 5 mm.
• Allen socket, 6 mm.
• Circlip pliers
Remove backrest frame
1. Remove backrest. See Removing backrest , Page 84.
2. If equipped with quick lock. Remove the lock pin by pressing
button (A).
Figure 264. Curved backrest, removal from backrest
frame.
Figure 265. Curved solid backrest, installing on
backrest frame.
Figure 266. Lock pin for seat equipped with quick lock.
Button (A) releases lock pin.
Repairs
87