Permobil M1 Service Manual page 98

Repairs
7. If the wheelchair has power leg rest, remove the two screws that
connects the leg rest actuator to the seat frame.
8. Remove four screws and lift off the seat frame.
Use a protection mat to prevent damage to the seat and surface.
Install seat frame
1. Depending on what features the seat has; put the seat frame on the
seat tilt, or the fixed seat. Attach it with four screws.
2. If the wheelchair has power leg rest, attach the leg rest actuator on
the seat frame with the two screws. Tightening torque: 7.2 lb.ft.
98
Figure 300. Remove the leg rest actuator from the seat
frame.
Figure 301. Remove the seat frame.
Figure 302. Attach the seat frame with four screws.
Figure 303. Attach the leg rest actuator on the seat
frame.
Permobil M1