Permobil M1 Service Manual page 107

Permobil M1
9. Remove circlip, washer and pin (A).
10. Remove the M12 bolt (B).
11. Lift off upper part of the seat lift.
Install seat tilt, upper part
1. Put the upper part of the seat tilt on the lower part of the seat tilt.
2. Attach the M12 bolt (B). Tightening torque: 84 lb.ft.
3. Attach circlip, washer and pin (A). Do a check of your recorded pin
position
4. Attach leg rest. See Install leg rest , Page 100.
Figure 324. Remove circlip and bolt.
Figure 325. Remove upper part of the seat lift.
Figure 326. Attach circlip and bolt.
Repairs
107