Permobil M1 Service Manual page 110

Repairs
5. Attach ESP (Enhanced steering performance) (B) if installed.
Tightening torque: 0,22 lb.ft.
6. Attach ISM (Intelligent seating module) (A). Torx, T10.
1. Install the seat. See Install seat , Page 82.
Seat height kit
Remove and install seat height kit
1. Remove seat. See Remove seat , Page 81.
2. Remove the circlip, washer and pin (A).
3. Remove the bolt (B).
4. Attach or remove seat height kit (B) 1" or (C) 2", on splined shaft.
5. Lubricate (Molybdenum Disulfide Black) the threads of the new
M12 bolt and the underside of bolt head, fit the re-used washer.
6. Install the seat. See Install seat , Page 82.
110
A
Figure 333. Attach ISM (intelligent seating module) (A)
and ESP (Enhanced steering performance) (B) if installed.
Figure 334. Remove circlip and bolt.
Figure 335. Spacers and bolts to adjust seat to floor
height.
Permobil M1
B