Permobil M1 Service Manual page 29

Permobil M1
1. Place the wheelchair on a level surface.
2. Use the control panel to raise the leg rest. For manual leg rest, pull
out the handle to raise the leg rest.
3. Tilt the seat as far as possible to make the covers more accessible.
4. Switch off the power supply using the On/Off key on the control
panel and switch the automatic main circuit breaker to Off.
5. Remove the knob holding the chassis top cover.
6. Slide the top cover off the chassis.
Figure 64. On/Off symbol depending on model.
ON / OFF
Figure 65. Main circuit breaker.
Figure 66. The top chassis cover is secured with a knob.
Figure 67. Slide the top chassis cover off.
Repairs
29